FixVault

Execution Condition

Secondary Parameters Execution condition
< Idle speed diagnosis >
Barometric pressure ≥ 75.1 kPa (563 mmHg, 22.2 inHg)
Battery voltage ≥ 10.9 V
Vehicle speed ≤ 2 km/h (1.2 MPH)
Engine coolant temperature ≤ 70 °C (158 °F)
Intake air amount sum value < Value of Map 1
Elapsed time after gear position change ≥ 3000 ms
(P ←→ D or N ←→ D)  
Throttle valve opening angle < 0.37 °
Fuel volatility Not extremely low volatility
Elapsed time after starting the engine ≥ 2000 ms
< Final ignition timing diagnosis >
Barometric pressure ≥ 75.1 kPa (563 mmHg, 22.2 inHg)
Battery voltage ≥ 10.9 V
Vehicle speed ≤ 2 km/h (1.2 MPH)
Engine coolant temperature ≤ 70 °C (158 °F)
Intake air amount sum value < Value of Map 2
Elapsed time after gear position change ≥ 3000 ms
(P ←→ D or N ←→ D)  
Throttle valve opening angle < 0.37 °
Fuel volatility Not extremely low volatility
Target retard amount ≥ 5°CA
ENGINE COOLANT TEMPERATURE SPECIFICATION

Engine coolant temperature at engine starting °C (°F) -40 (-40) -30 (-22) -20 (-4) -10 (14) 0 (32) 10 (50) 20 (68) 30 (86) 40 (104) 50 (122) 60 (140) 70 (158) 80 (176) 90 (194) 100 (212) 110 (230)
Intake air amount sum value g (oz) 2391 (84.3 3) 1872 (66.0 1) 1419 (50.0 5) 1033 (36.4 5) 715 (25.2 1) 450 (15.8 7) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6)
ENGINE COOLANT TEMPERATURE SPECIFICATION

Engine coolant temperature at engine starting °C (°F) -40 (-40) -30 (-22) -20 (-4) -10 (14) 0 (32) 10 (50) 20 (68) 30 (86) 40 (104) 50 (122) 60 (140) 70 (158) 80 (176) 90 (194) 100 (212) 110 (230)
Intake air amount sum value g (oz) 2391 (84.3 3) 1872 (66.0 1) 1419 (50.0 5) 1033 (36.4 5) 715 (25.2 1) 450 (15.8 7) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6) 390 (13.7 6)