FixVault

Switch - power window sub rear

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trim panel - rear door. < Ref. to REAR DOOR , REMOVAL, Door Trim.>
  2. Remove the panel - power window sub switch rear.
    CAUTION: Be careful not to damage the trim panel - rear door with the panel - power window sub switch rear.
    1. Insert a sheet of protective paper (a) between panel - power window sub switch rear and trim panel - rear door.
    2. Remove the screws and disconnect the connector.
      Fig 1: Removing Power Window Sub Switch Connector
      G09489631Courtesy of SUBARU OF AMERICA, INC.
    3. Release the claws, and then remove the panel - power window sub switch rear.
      Fig 2: Removing Power Window Sub Switch Panel (Rear)
      G08315138Courtesy of SUBARU OF AMERICA, INC.
  3. Release the claws, and then remove the switch - power window sub rear.
    Fig 3: Identifying Power Window Sub Rear Switch Claws
    G09489633Courtesy of SUBARU OF AMERICA, INC.