Front Outer Handle: Installation

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Before installation, check the following items.
- Rod is free from deformation.
- Grease is applied sufficiently to rod joints.
If grease is insufficient, add it as necessary before assembling the rod.
Install each part in the reverse order of removal.
CAUTION: When installing the cover - handle front outer on driver's side, make sure that the key cylinder shaft is correctly inserted into the latch & actuator assembly - front.

Tightening torque: Refer to "COMPONENT" of "General Description". < Ref. to DOOR LOCK ASSEMBLY , COMPONENT, General Description.>