FixVault
Home › Subaru › 2016 › Crosstrek Base › Repair and Diagnosis › External Pages › Different car › Section 33 (Security And Locks) › ID Code Box › Removal

ID Code Box: Removal

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Equipped on keyless access model for C0, C5.
  • The installation location of ID code box is the same as that for the security control module.
  1. Remove the heater and cooling unit assembly. < Ref. to REMOVAL , Heater and Cooling Unit.>
  2. Remove ID code box.
    1. Disconnect the connector.
    2. Remove the nut to remove ID code box.
      Fig 1: Locating Nut Of ID Code Box
      G08319276Courtesy of SUBARU OF AMERICA, INC.
About FixVault