FixVault
Home › Subaru › 2016 › Crosstrek Base › Repair and Diagnosis › External Pages › Different car › Section 33 (Security And Locks) › Keyless Entry Control Module › Removal › 4 Door Model

4 Door Model

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the trim panel assembly - rear shelf. < Ref. to REMOVAL , Rear Shelf Trim.>
  3. Remove the keyless entry control module.
    1. Disconnect the connector.
    2. Remove the bolt and then remove the keyless entry control module.
      Fig 1: Locating Bolt Of Keyless Entry Control Module (4 Door Model)
      G08319277Courtesy of SUBARU OF AMERICA, INC.
About FixVault