FixVault
Home › Subaru › 2016 › Crosstrek Base › Repair and Diagnosis › External Pages › Different car › Section 33 (Security And Locks) › Push Button Ignition Switch › Removal

Push Button Ignition Switch: Removal

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cover assembly - instrument panel LWR driver and the knee airbag module. < Ref. to REMOVAL , Knee Airbag Module.>
  2. Remove the push button ignition switch.
    1. Disconnect the connector, and remove the aspirator hose.
      Fig 1: Identifying Connector And Aspirator Hose
      G08316199Courtesy of SUBARU OF AMERICA, INC.
    2. Release the claws, and then remove the panel - switch.
    3. Release the claws, and then remove the push button ignition switch from the panel - switch.
      Fig 2: Pushing Button Ignition Switch From Panel - Switch
      G09483949Courtesy of SUBARU OF AMERICA, INC.
About FixVault