Rear Height Sensor: Removal

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Always remove the sensor assembly - headlight beam leveler before removing any parts related to the suspension.

Disconnect the ground cable from battery. < Ref. to BATTERY , NOTE, Note.>
NOTE: For the 12 volt engine restart battery of HEV model, disconnect the ground terminal from 12V engine restart battery sensor.
Lift up the vehicle, and remove the left rear wheel.
Remove the sensor assembly - headlight beam leveler.
CAUTION: Do not disassemble the sensor and lever.
1. Disconnect the connector.
2. Remove the nuts, and remove the sensor assembly - headlight beam leveler.
  
  Fig 1: Locating Rear Height Sensor Connector And Headlight Beam Leveler Bolts
  Courtesy of SUBARU OF AMERICA, INC.