Spot Map Light: Removal

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery. < Ref. to BATTERY , NOTE, Note.>
NOTE: For the 12 volt engine restart battery of HEV model, disconnect the ground terminal from 12V engine restart battery sensor.
Remove the light assembly - map.
CAUTION: When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.
1. Release the claws and remove the lens.
2. Remove the screws and pull out the light assembly - map.
  - Model without sunroof
    
    Fig 1: Locating Spot Map Light Screws (Model Without Sunroof)
    Courtesy of SUBARU OF AMERICA, INC.
  - Model with sunroof
    
    Fig 2: Locating Spot Map Light Screws (Model With Sunroof)
    Courtesy of SUBARU OF AMERICA, INC.
3. Disconnect the connector and remove the light assembly - map and the bulb.
CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.