Rear Wheel Toe-In

When adjusting, adjust it to the following value.

Toe-in: Adjustment value 

Impreza model: 3±2 mm (0.12±0.08 in) 

Crosstrek model: 0±2 mm (0±0.08 in) 

1. Loosen the self-locking nut for the lateral link assembly - front.
   NOTE: When loosening or tightening the adjusting bolt, hold the bolt head and turn the self-locking nut.
   Fig 1: Identifying Rear Wheel Toe-In

   
2. Turn the adjusting bolt until toe-in is within the specification.
   NOTE: When the left and right wheels are adjusted for toe-in at the same time, the movement of one scale graduation changes toe-in by approx. 1.3 mm (0.05 in).

   To increase toe-in.
   Rotate the left side clockwise.	Rotate the right side counterclockwise.

   To decrease toe-in.
   Rotate the left side counterclockwise.	Rotate the right side clockwise.

3. Attach and tighten a new self-locking nut.

   Tightening torque: 

   100 N.m (10.20 kgf-m, 73.8 ft-lb)