FixVault
Home › Subaru › 2016 › Forester 2.0XT Premium › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection (Fuel Systems) (H4DOTC) › Camshaft Position Sensor › Removal › Intake Side

Intake Side

  1. Disconnect the ground cable from battery.
  2. Remove the air intake duct (rear). (RH side only) Ref. to INTAKE (INDUCTION) (H4DOTC) > Air Intake Duct >  REMOVAL  .
  3. Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor from the chain cover.
Fig 1: Identifying Camshaft Position Sensor Connector With Bolt (RH Side)
G09479736Courtesy of SUBARU OF AMERICA, INC.
Fig 2: Identifying Camshaft Position Sensor Connector With Bolt (LH Side)
G09479737Courtesy of SUBARU OF AMERICA, INC.
About FixVault