FixVault
Home › Subaru › 2016 › Forester 2.0XT Touring › Repair and Diagnosis › Body & Frame › Door Locks › Security And Locks › ID Code Box › Removal

ID Code Box: Removal

NOTE:
  • Equipped on C0 and C5 models with keyless access with push button start.
  • The ID code box is located at the place of security control module.
  1. Remove the heater and cooling unit assembly. Ref. to HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Heater and Cooling Unit > -- > REMOVAL .
  2. Remove the ID code box.
    1. Disconnect the connector.
    2. Remove the nut and remove the ID code box.
Fig 1: Locating ID Code Box Nuts
G08319276Courtesy of SUBARU OF AMERICA, INC.
About FixVault