FixVault
Home › Subaru › 2016 › Forester 2.0XT Touring › Repair and Diagnosis › Body & Frame › Door Locks › Security And Locks › Impact Sensor › Installation

Impact Sensor: Installation

  1. Pull out the key from the ignition switch, or turn the ignition to OFF.
  2. Close all the doors and rear gate.
  3. Press the UNLOCK button of the keyless transmitter or access key.
  4. Disconnect the ground cable from battery.
  5. Install the impact sensor.
  6. Change the setting of impact sensor using Subaru Select Monitor.
About FixVault