Stop Light Switch: Installation
WARNING: This page is about a different car, the 2017 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Install the stop light switch.CAUTION:
- Turn the stop light switch clockwise when installing so that it can return backward by approximately 1 mm (0.04 in) and clearance is automatically adjusted.
- If it is hard to turn the switch, reduce the switch pushing force and turn it.
- Adjust the stop light switch position, and then secure the stop light switch by turning it clockwise. Ref. to BRAKE>Stop Light Switch>ADJUSTMENT .
- Install each part in the reverse order of removal.
- Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .