FixVault
Home › Subaru › 2016 › Forester 2.0XT Touring › Repair and Diagnosis › External Pages › Different car › Section 146 (Power Steering System) › Power Steering Control Module › Installation

Power Steering Control Module: Installation

WARNING: This page is about a different car, the 2017 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power steering control module.

    Tightening torque: 

    7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

  2. Connect the harness connector.
    CAUTION: Make sure that the connector is securely locked.
  3. Attach the harness bracket.

    Tightening torque: 

    7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

  4. Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .
About FixVault