Auto Headlight Beam Leveler System: Procedure: Initialization
WARNING: This page is about a different car, the 2017 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Check that the indicator in the meter is flashing twice repeatedly.
- Bounce the vehicle several times to normalize the suspension.
- Make certain that someone is seated in the driver's seat.
- Turn the ignition switch to ON, and within 1.5 to 20 seconds, turn the headlight switch OFF → ON three times.
- Make sure that the indicator in the meter flashes three times and then turns OFF, indicating that initialization has been successfully completed. (At this time, the headlight beam drops once, and then returns to the original position.)
- After checking step 5, turn the ignition switch to OFF.
- Turn the ignition switch to ON, and within 1.5 to 10 seconds, turn the headlight switch OFF → ON five or more successive times.
- Check that the headlight beam drops once, then returns to normal.
- After checking step 8, turn the ignition switch to OFF.
- Turn the headlight switch to ON.
- Start the engine.
- Check that the headlight beam moves to the right and left and then returns to the center position.
- Perform beam adjustment for the headlight. Ref. to LIGHTING SYSTEM>Headlight Assembly>ADJUSTMENT .