Light Control Sensor: Removal

WARNING: This page is about a different car, the 2017 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery. Ref. to NOTE>NOTE>BATTERY .
NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
Remove the sensor - automatic light.
CAUTION: Be careful not to damage the sensors and interior trims when removing.
1. Release the connector and claws, and remove the grille - front defroster.
  
  Fig 1: Locating Grille - Defroster Connector And Claws
  Courtesy of SUBARU OF AMERICA, INC.
2. Release the claws, and remove the sensor - automatic light from the grille - front defroster.

Fig 2: Locating Automatic Light Claws From Grille - Front Defroster

Courtesy of SUBARU OF AMERICA, INC.