Rear Combination Light Assembly: Inspection

WARNING: This page is about a different car, the 2017 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Apply battery voltage between the connector terminals to check the lighting condition of the light.

Fig 1: Applying Battery Voltage Between Connector Terminals

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Specification
5 (+) - 6 (-)	Apply battery voltage.	Stop light on
1 (+) - 6 (-)		Tail (parking) light on
2 (+) - 6 (-)		Turn signal light on
3 (+) - 6 (-)		Back-up light on

Replace the harness and bulb if it is found defective.