Primary Speed Sensor: Removal

CAUTION: Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.

1. Disconnect the ground cable from battery.
2. Remove the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>Intercooler> REMOVAL  .
3. Clean the transmission exterior.
4. Remove the primary speed sensor harness connector.
   Fig 1: Identifying Primary Pressure Sensor Harness Connector

   Courtesy of SUBARU OF AMERICA, INC.
5. Remove the primary speed sensor and the spacer.

Fig 2: Locating Primary Speed Sensor And Spacer Bolt

Courtesy of SUBARU OF AMERICA, INC.