System Operation Check Mode: Operation: Engine
NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
| Item | Subaru Select Monitor display | Execution condition | ||
|---|---|---|---|---|
| Activating the actuator ON/OFF | Activating the fuel pump ON/OFF | «Fuel pump» | «ON output» ←→ «OFF output» | Ignition switch ON (engine OFF) |
| Activating the purge control solenoid valve ON/OFF | «CPC solenoid» | «ON output» ←→ «OFF output» | ||
| Activating the radiator fan relay ON/OFF | «Radiator fan relay» | «ON output» ←→ «OFF output» | ||
| Activating the A/C relay ON/OFF | «A/C relay» | «ON output» ←→ «OFF output» | ||
| Activating the ELCM switching valve | «ELCM switching valve» | «ON» ←→ «OFF» | ||
| Activating the ELCM vacuum pump | «ELCM pump» | «ON» ←→ «OFF» | ||
| Fuel pump control | Fuel pump OFF operation | «OFF drive» | «OFF output» | Idling |
| Idling Ignition Timing Fixed | Fixed Idle Ignition Timing | 16.0° | Idling | |
| Idle speed control | Idle Speed Control | 500 - 2000 rpm | Idling | |
| Injector control | Stopping fuel injection (Cylinder selection) | Injection Stop Mode | «Injector 1» «Injector 2» «Injector 3» «Injector 4» |
Idling |
| Fuel injection amount control (All cylinders) | «Injection quantity control» | 0 - 20% | Idling | |
| EGR control valve control | Idling | |||
| «EGR valve control» | 0 - 255 STEP | |||
| Alternator control | Alternator control | Low mode Middle mode High mode ExHigh mode |
Idling | |