Camshaft Position Sensor: Removal

1. Disconnect the ground cable from battery.
2. Remove the air intake duct (rear). (RH side only) Ref. to INTAKE (INDUCTION) (H4DO) > Air Intake Duct > REMOVAL .
3. Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor from the chain cover.

• RH side

Fig 1: Identifying Camshaft Position Sensor Connector (RH Side)

Courtesy of SUBARU OF AMERICA, INC.

• LH side

Fig 2: Identifying Camshaft Position Sensor Connector (LH Side)

Courtesy of SUBARU OF AMERICA, INC.