Oil Control Solenoid: Removal

1. Disconnect the ground cable from battery.
2. Remove the air intake duct (rear). (RH side only) Ref. to INTAKE (INDUCTION) (H4DO) > Air Intake Duct > REMOVAL .
3. Remove the reservoir tank. (LH side only) Ref. to COOLING(H4DO) > Reservoir Tank > REMOVAL .
4. Disconnect the connector (A) from the oil control solenoid, and remove the oil control solenoid from the chain cover.

• RH side
  Fig 1: Identifying Oil Control Solenoid Connector (RH Side)

  Courtesy of SUBARU OF AMERICA, INC.
• LH side

Fig 2: Identifying Oil Control Solenoid Connector (LH Side)

Courtesy of SUBARU OF AMERICA, INC.