External Connection Terminal: Removal

Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. < Ref. to BATTERY , NOTE, Repair Contents. >
Remove the heater control assembly. < Ref. to REMOVAL , Control Panel. >
Remove the cover assembly - front and the console box assembly. < Ref. to REMOVAL , Console Box. >
Release the claws, and then remove the panel center LWR.

Fig 1: Identifying Panel Center LWR Claws
Courtesy of SUBARU OF AMERICA, INC.
Remove the screws and remove the pocket assembly - CTR.

Fig 2: Locating CTR Pocket Assembly Screws
Courtesy of SUBARU OF AMERICA, INC.
While pressing the claw, press it in form the rear to remove the unit assembly - AUX.

Fig 3: Removing AUX Unit Assembly
Courtesy of SUBARU OF AMERICA, INC.