| The door lock control system does not operate. |
1. Remove and visually inspect the following fuses.
- No. 14 (in fuse & relay box)
- No. 26 (in fuse & relay box)
- No. 14 (in main fuse box)
|
If the fuse is blown out, replace the fuse with a new part. When there is no defective with the fuse, check the power supply and ground circuit. < Ref. to
CHECK POWER SUPPLY AND GROUND CIRCUIT , INSPECTION, Door Lock Control System. > |
| 2. Check the power supply and ground circuit for body integrated unit. |
< Ref. to
CHECK POWER SUPPLY AND GROUND CIRCUIT , INSPECTION, Door Lock Control System. > |
| 3. Check the door lock switch and the circuit. |
< Ref. to
CHECK DOOR LOCK SWITCH , INSPECTION, Door Lock Control System. > |
| 4. Check the rear gate/trunk opener button and the circuit. |
< Ref. to
CHECK REAR GATE OPENER BUTTON CIRCUIT , INSPECTION, Door Lock Control System. > |
| 5. Check the door lock actuator and the circuit. |
< Ref. to
CHECK DOOR LOCK ACTUATOR AND CIRCUIT , INSPECTION, Door Lock Control System. > |
| A specific door lock actuator does not operate. |
Check the door lock actuator and circuit. |
< Ref. to
CHECK DOOR LOCK ACTUATOR AND CIRCUIT , INSPECTION, Door Lock Control System. > |