FixVault
Home › Subaru › 2016 › Outback 2.5i › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Impact Sensor › Installation

Impact Sensor: Installation

  1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.
  2. Close all the doors, trunk lid and rear gate.
  3. Press the UNLOCK button of the keyless transmitter or access key.
  4. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  5. Install the impact sensor.
  6. Change the setting of impact sensor using Subaru Select Monitor.
About FixVault