Rear Lock Button: Installation

CAUTION: Make sure that the harness grommet is securely installed.
If not properly installed, this may cause leaks.

Install the rear lock button and the switch - opener rear gate.
Install the garnish assembly - rear gate. < Ref. to INSTALLATION , Rear Gate Garnish. >
Tightening torque

4.5 N.m (0.4 kgf-m, 3.3 ft-lb)
Install the trim panel - rear gate. < Ref. to INSTALLATION , Rear Gate Trim. >
Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >