FixVault
Home › Subaru › 2016 › Outback 2.5i › Repair and Diagnosis › Body & Frame › Seats › Seat System - Seats › Seat Heater System › Inspection › Check Rear Seat Heater Control Module

Check Rear Seat Heater Control Module

Fig 1: Rear Seat Heater Control Module Connector Terminal Identification
G10272884Courtesy of SUBARU OF AMERICA, INC.
  1. Disconnect the connector of rear seat heater control module.
  2. Check the continuity between the connectors.

    Connector & terminal 

    5 - 7 

    14 - 7 

    Is there continuity?

    • Yes  → Repair or replace the harness.
    • No  → Replace the rear seat heater control module.
About FixVault