FixVault
Home › Subaru › 2016 › Outback 2.5i › Repair and Diagnosis › Body & Frame › Windows › Window Glass & Mirrors (Service Information) › Power Window Control Switch › Removal › Main Switch

Main Switch

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the trim panel - front door. < Ref. to FRONT DOOR , REMOVAL, Door Trim. >
  3. Remove the panel - power window main switch.
    CAUTION: Be careful not to damage the trim panel - front door with the panel - power window main switch.
    1. Insert a sheet of protective paper (a) between panel - power window main switch and trim panel - front door.
    2. Remove the screws.
      Fig 1: Inserting Sheet Of Protective Paper Between Power Window Main Switch Panel And Front Door Trim Panel
      G10272704Courtesy of SUBARU OF AMERICA, INC.
    3. Release the claws, and then remove the panel - power window main switch.
      Fig 2: Removing Power Window Main Switch Panel
      G10272705Courtesy of SUBARU OF AMERICA, INC.
    4. Release the claws, and then remove the switch - power window main.
      Fig 3: Identifying Power Window Main Switch Claws
      G10272706Courtesy of SUBARU OF AMERICA, INC.
About FixVault