Basic Diagnostic Procedure: Procedure

DIAGNOSTIC PROCEDURE

Step	Check	Yes	No
1 PERFORM CUSTOMER INTERVIEW. Using the Check List for Interview, ask the customer the condition of how trouble occurs. < Ref. to CHECK , Check List for Interview. >	Did you interview the customer?	Go to step 2 .	Interview the customer. < Ref. to CHECK , Check List for Interview. >
2 CHECK CAN COMMUNICATION. Read the DTC of the CAN system using the Subaru Select Monitor. < Ref. to OPERATION , Read Diagnostic Trouble Code (DTC). >	Is DTC displayed?	Perform the diagnosis according to DTC. < Ref. to LIST , List of Diagnostic Trouble Code (DTC). >	Go to step 3 .
3 CHECK COMBINATION METER. Using the Subaru Select Monitor, read DTC of combination meter. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . >	Is DTC displayed?	Record DTC and time stamp, and perform the diagnosis according to DTC. < Ref. to LIST , List of Diagnostic Trouble Code (DTC). > For time stamp, refer to "LAN SYSTEM". < Ref. to TIME STAMP , CAUTION, General Description. > Go to step 5 .	Go to step 4 .
4 CHECK COMBINATION METER. Check the operation of combination meter. < Ref. to SYSTEM OPERATION CHECK MODE . >	Is it operating normally?	System is normal.	Replace the combination meter. < Ref. to COMBINATION METER . >
5 PERFORM DIAGNOSIS. Perform the Clear Memory Mode. < Ref. to CLEAR MEMORY MODE . > Perform the Inspection Mode. < Ref. to INSPECTION MODE . > Using the Subaru Select Monitor, read DTC of combination meter. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . >	Is DTC displayed?	Perform diagnosis according to the DTC.	Finish the diagnosis.