Horn System: Horn: Installation
CAUTION:
Install so that the front end of the under cover (b) comes inside the bumper face - front (a), and the front end of the mud guard (c) comes outside the bumper face - front (a).
Fig 1: Identifying Proper And Improper Installation Position Of Front Bumper Face And Front End Of Mud Guard Or Under Cover
- Install the horn assembly.
Tightening torque:
18 N.m (1.8 kgf-m, 13.3 ft-lb)
- Install the mud guard - front.
- Lower the vehicle.
- Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >