FixVault
Home › Subaru › 2016 › Outback 2.5i › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine Intake System (Induction) (H4DO) › Air Intake Boot › Removal

Air Intake Boot: Removal

  1. Remove the clip (A) from the air intake boot.
  2. Loosen the clamp (B) securing the air cleaner case (rear) to the air intake boot.
  3. Loosen the clamp (C) which secures the throttle body to the air intake boot.
    Fig 1: Identifying Air Intake Boot Clip And Clamps
    G10262107Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the PCV hose and remove the air intake boot.
About FixVault