Radiator Fan Control Module (Main)
WARNING: This page is about a different variant/trim than selected.
- Install the radiator fan control module (main), and install the bolts securing the radiator fan control module (main).
Tightening torque:
2.6 N.m (0.3 kgf-m, 1.9 ft-lb)
- Connect the radiator fan harness connector (A) and radiator main fan motor connector (B) to the radiator fan control module (main).
- Install the air intake duct. < Ref. to INSTALLATION , Air Intake Duct. >
- Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
- Install the collector cover.