Wheel Alignment: Inspection: Camber

Place the front wheel on the turning radius gauge.
NOTE: Make sure the ground contact surfaces of the front and rear wheels are at the same height.
Set the adapter into the center of wheel, and then set the wheel alignment gauge.

Fig 1: Placing Front Wheel On Turning Radius Gauge
Courtesy of SUBARU OF AMERICA, INC.

Measure the camber angle in accordance with the operation manual for wheel alignment gauge.

Tire size		Camber (difference between RH and LH 45' or less)
Tire size		Front	Rear
Sedan model	P225/55R17 P225/50R18	-0°15'±0°45'	-1°25'±0°45'
OUTBACK model	P225/65R17 P225/60R18	0°00'±0°45'	-1°00'±0°45'