Active Test: Operation

CAUTION:

Be sure to perform the active test while the engine is not running.
After executing the active test, execute the Clear Memory Mode.

On «Start» display, select «Diagnosis».
On «Vehicle selection» display, input the vehicle information and select «Confirmed».
On «Main Menu» display, select «Each System Check».
On «Select System» display, select «Transmission Control System».

On «Select Function» display, select «Active Test».

Item	SSM display	Execution condition
Activating the actuator ON/OFF	F & R Clutch Solenoid	When all of the following conditions are met: P range Ignition switch is ON (engine stops) Battery voltage is 10.9 V or more
	Secondary Solenoid
	Primary Down Solenoid
	Primary Up Solenoid
	AWD Solenoid
	Lock-Up Duty Solenoid
	Lock-Up ON/OFF Solenoid

NOTE: For detailed operation procedures, refer to "Application help".