FixVault
Home › Subaru › 2016 › Outback 2.5i › Repair and Diagnosis › Transmission › Automatic Trans › Continuously Variable Transaxle (CVT) (H4DO) › Reduction Driven Gear › Installation

Reduction Driven Gear: Installation

  1. Install the reduction driven gear assembly and spacer oil.

    Tightening torque: 

    17 N.m (1.7 kgf-m, 12.5 ft-lb) 

    Fig 1: Identifying Reduction Driven Gear Nut
    G10218734Courtesy of SUBARU OF AMERICA, INC.
  2. Select the transfer drive gear shim. < Ref. to ADJUSTMENT , Reduction Drive Gear. >
  3. Install the parking pawl. < Ref. to INSTALLATION , Parking Pawl. >
  4. Attach the selected transfer drive gear shim to extension case with vaseline.
  5. Install the transfer driven gear assembly. < Ref. to INSTALLATION , Transfer Driven Gear. >
  6. Install the transfer clutch assembly. < Ref. to INSTALLATION , Transfer Clutch. >
  7. Install the extension case. < Ref. to INSTALLATION , Extension Case. >
  8. Install the transmission assembly. < Ref. to INSTALLATION , Automatic Transmission Assembly. >
About FixVault