FixVault
Home › Subaru › 2016 › Outback 2.5i › Repair and Diagnosis › Transmission › Automatic Trans › Continuously Variable Transaxle (CVT) (H4DO) › Torque Converter Assembly › Removal

Torque Converter Assembly: Removal

  1. Remove the transmission assembly. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Pull out the torque converter assembly horizontally.
    CAUTION: Do not scratch the inside of engaging parts.
    Fig 1: Identifying Torque Converter Assembly
    G10275128Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the O-ring from the input shaft.
About FixVault