FixVault
Home › Subaru › 2016 › Outback 3.6R Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (H6DO) › Camshaft Position Sensor › Installation › Intake Side

Intake Side

  1. Install the camshaft position sensor, and connect the connector to the camshaft position sensor.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

  2. Install the fuel injector. < Ref. to INSTALLATION , Fuel Injector. >
  3. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  4. Install the collector cover.
About FixVault