FixVault
Home › Subaru › 2016 › Outback 3.6R Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (H6DO) › Oil Temperature Sensor › Installation

Oil Temperature Sensor: Installation

  1. Install the oil temperature sensor to the cylinder block, and connect the connector to the oil temperature sensor.

    Tightening torque: 

    18 N.m (1.8 kgf-m, 13.3 ft-lb) 

  2. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  3. Install the collector cover.
About FixVault