Secondary Speed Sensor: Installation

CAUTION: Be sure to prevent water or oil from contacting the connector terminal of secondary speed sensor. If adhesion occurs, replace with a new part.

Install the secondary speed sensor.
NOTE:
- Use new O-rings.
- Apply CVTF to the O-rings.
Tightening torque:

5 N.m (0.5 kgf-m, 3.7 ft-lb)
Connect the harness connector.
Install the transmission cover.
Tightening torque:

8 N.m (0.8 kgf-m, 5.9 ft-lb)
Install the transmission assembly. < Ref. to INSTALLATION , Automatic Transmission Assembly. >