Confirm Current Setting
- On «Start» display, select «Diagnosis».
- On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
- On «Main Menu» display, select «Each System».
- On «Select System» display, select «Body Control» and then select «Enter».
- On «Select Function» display, select «Customize».
- Save the setting.
Required items for new registration. (Except for system not equipped)
Item Item to confirm Remarks number of regist. 1 2 3 4 Number of registered ID Off delay time OFF 10 Sec 20 Sec 30 Sec Setting for lighting off time Auto Light Sensitivity Adjustment Dull Normal (Standard) Sensitive Very Standard 1st (slow) - 4th (fairly quick) Lane change signal setting ON OFF Rear wiper auto setting ON OFF - TPMS Setting TPMS No TPMS - Driver's Door Unlock Setting ALL Selection - Rear Gate Unlock Setting ALL Selection - Steering Responsive Fog Lamp Setting ON OFF - High Beam Assist Setting (Mirror) ON OFF - Low Beam Type Halogen/HID/LED - High Beam Type Halogen/HID/LED - High Beam Assist Current Setting ON OFF - Rear defogger operation mode Normal Continuous - Security Alarm Setup ON OFF - Impact Sensor Setup ON OFF Option setting Alarm delay setup ON OFF - Lockout prevention ON OFF - Impact sensor ON OFF Option setting Buzzer sounding setting ON OFF - Abnormal warning lamp flashing setting ON OFF - Passive Alarm ON OFF - Door open warning ON OFF - Dome Light Alarm Setting ON OFF - Auto A/C ECU Setting ON OFF - wiper deicer ON OFF Option setting Illumination Control On/Off ON OFF - Sedan/Wagon Setting WAGON SEDAN - MT/AT Setting MT AT - Seat Memory Setting ON OFF N/A Illumination Sensor Setting ON OFF Option setting Factory initial setting Factory Market Do not change to factory mode. Welcome Light (Exit) OFF/30 Sec/60 Sec/90 Sec Option setting Welcome Light Off Delay Time(Approaching) OFF/30 Sec/60 Sec/90 Sec Option setting Keyless Buzzer Volume 1 2 3 4 5 6 7 -