Combination Meter: Installation

CAUTION:

Make sure the electrical connector is connected securely.
Make sure that each meter operates normally.
When the combination meter assembly has been replaced, be sure to perform the following operations.

For models without the keyless access with push button start except for CO, be sure to perform the registration of immobilizer. For the relevant procedures, refer to the "REGISTRATION MANUAL FOR IMMOBILIZER".
Be sure to reset the ODO fuel economy value of the multi-function display (MFD). < Ref. to ODO FUEL ECONOMY VALUE RESET , OPERATION, Multi-function Display (MFD) System. >

Install the combination meter assembly.
Install the visor - combination meter.
Connect the battery ground terminal. < Ref. to BATTERY , NOTE, Note. >
NOTE: For models other than STI model, connect the ground terminal to battery sensor.