Ignition Timing: Inspection
CAUTION:
After warming-up, engine becomes very hot. Be careful not to burn yourself at measurement.
- Before checking the ignition timing, check the following item:
- Check the air cleaner element is free from clogging, spark plugs are in good condition, and hoses are connected properly.
- Check the malfunction indicator light does not illuminate.
- Warm up the engine.
- Read the ignition timing using Subaru Select Monitor. < Ref. to
DISPLAY CURRENT ENGINE DATA
, OPERATION, Subaru Select Monitor. >NOTE: If ignition timing is out of standard, check the ignition control system. Refer to "Engine Control System". < Ref. to BASIC DIAGNOSTIC PROCEDURE . >
Ignition timing [BTDC/{r/min}]:
Standard
8°±10°/700 (CVT model)
6°±10°/700 (MT model)