FixVault
Home › Subaru › 2016 › WRX Base › Repair and Diagnosis › External Pages › Different car › Section 35 (Front Suspension And Wheel Alignment) › Stabilizer › Removal › Stabilizer Bushing

Stabilizer Bushing

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the under cover front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER> REMOVAL .
  2. Remove the rubber bushing stabilizer front.
    1. Remove the bolt and nut, and remove the clamp stabilizer.
    2. Remove the rubber bushing stabilizer front.
G14601726Courtesy of SUBARU OF AMERICA, INC.
About FixVault