FixVault
Home › Subaru › 2016 › WRX Base › Repair and Diagnosis › External Pages › Different variant/trim › Section 10 (Continuously Variable Transaxle (CVT)) › Forward Clutch Assembly › Removal

Forward Clutch Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission from the vehicle. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Remove the extension case. < Ref. to REMOVAL , Extension Case. >
  3. Remove the rear drive shaft. < Ref. to REMOVAL , Rear Drive Shaft. >
  4. Remove the transfer clutch assembly. < Ref. to REMOVAL , Transfer Clutch. >
  5. Remove the center differential carrier. < Ref. to REMOVAL , Center Differential Carrier. >
  6. Remove the transfer reduction driven gear. < Ref. to REMOVAL , Transfer Reduction Driven Gear. >
  7. Remove the intermediate case. < Ref. to REMOVAL , Intermediate Case. >
  8. Remove the thrust needle bearing.
    Fig 1: Identifying Thrust Needle Bearing
    G06654566Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the forward clutch assembly.
    Fig 2: Identifying Forward Clutch Assembly
    G06654567Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the washer.
    Fig 3: Identifying Washer
    G06654568Courtesy of SUBARU OF AMERICA, INC.
About FixVault