Section 6 (Starting System & Charging System (WRX-STI)): Generator: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the ground cable from battery.
Remove the V-belt covers.

Fig 1: Locating V-Belt Cover Bolt
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector and terminal from generator.

Fig 2: Identifying Generator Connector And Terminal
Courtesy of SUBARU OF AMERICA, INC.
Remove the front side belt. < Ref. to FRONT SIDE BELT , REMOVAL, V-belt. >
Remove the bolts which install the generator onto bracket.

Fig 3: Locating Generator Bracket Bolts
Courtesy of SUBARU OF AMERICA, INC.