Knee Airbag Module: Installation

CAUTION:

Refer to "CAUTION" of "General Description" before handling the airbag system components. < Ref. to CAUTION , General Description. >
Do not allow harness and connectors to interfere or get tangled up with other parts.

Before installation, inspect the following items and replace any faulty part with a new one.
- Airbag module is cracked or deformed.
- Knee airbag module bracket is cracked or deformed.
- Harness and/or connector is cracked, deformed or open.
- Harness wire is exposed.
- Depending on the condition of the beam COMPL - steering, installation of the knee airbag module is difficult.
Install the knee airbag module.
CAUTION:
- Be sure to insert the connector in until it is locked.
- Press in the push lock securely. Then pull it gently to make sure that it is locked.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Connect the battery ground terminal. < Ref. to BATTERY , NOTE, Note. >
NOTE: For models other than STI model, connect the ground terminal to battery sensor.