Paddle Shift Switch

Measure the resistance between connector terminals.

Preparation tool:

Circuit tester

Fig 1: Measuring Resistance Between Paddle Shift Switch Connector Terminals

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard
3 - 4	Operate the + side of paddle shift assembly and hold it.	Less than 10 Ω
2 - 3	Operate the - side of paddle shift assembly and hold it.	Less than 10 Ω
2 - 3 3 - 4	Do not operate the paddle shift assembly.	Is the resistance 1 MΩ or more?

Replace the paddle shift switch if the inspection result is not within the standard value.