FixVault
Home › Subaru › 2016 › WRX STI › Repair and Diagnosis › Engine Performance › Engine Control Systems › Speed Control System (WRX-STI) › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. Disconnect the ground cable from battery.
  2. Disconnect the connector (A).
  3. Remove the nut (B) securing accelerator pedal assembly, and remove the accelerator pedal assembly.
    Fig 1: Identifying Accelerator Pedal Assembly Connector And Nut
    G10265661Courtesy of SUBARU OF AMERICA, INC.
About FixVault