Cruise Control Main Switch: Removal

1. Disconnection of the battery ground terminal (Refer to Working precautions and notes )
   WARNING: Airbag and pretensioner system are equipped with backup power supply. Therefore, if any operation is started within 60 seconds after disconnecting the battery ground terminal, the airbag can deploy.
2. Removal of the steering wheel cover LWR No. 2
   1. Release the claw.
   2. Release the claw of the guide, and remove the steering wheel cover LWR No. 2.
   Fig 1: Identifying Claw Of Guide

   Courtesy of SUBARU OF AMERICA, INC.
3. REMOVE CRUISE CONTROL MAIN SWITCH ASSEMBLY
   1. Remove the harness from the holder, and disconnect the connector.
   2. Remove the 2 screws.
   3. Remove the cruise control main switch as shown in the figure.

Fig 2: Removing Cruise Control Main Switch Assembly

Courtesy of SUBARU OF AMERICA, INC.