customize function
- Customization of meter & gauge system
- Customization using the SSM4
- With the ignition turned to IG OFF, connect the SSM4 to the DLC3.
- Turn IG to ON, and turn on the SSM4.
- From the SSM4 screen, select [Customize] →[Warning] and perform the customization settings.
Display name Initial setting Contents Setting Controller ECM [Key Remind Sound] 1200 ms Setting of the warning cycle when the driver's door is opened while IG OFF or ACC ON 600 ms/900 ms/1200 ms Meter ECM [Taillight warning buzzer] [ON] Setting of the function that sounds a buzzer when the driver's door is opened while IG OFF and tail SW ON [ON]/[OFF] Meter ECM - From the SSM4 screen, select [Customize] →[Meter] and perform the customization settings.
| Display name | Initial setting | Contents | Setting | Controller ECM |
|---|---|---|---|---|
| [Outside temperature indication] | 0°C | Function of adjusting the difference from actual measurement by increasing/decreasing the displayed temperature (Temperature correction is only possible in increments of 1°C) | +3°/+2°C/+1°C/0°C/-1°C/-2°C/-3°C | Meter ECM |