FixVault
Home › Subaru › 2017 › BRZ Limited, Automatic Trans › Repair and Diagnosis › Engine Performance › System › Engine Control System (Service Information) › Knock control sensor (FA20) › Unit inspection

Unit inspection

  1. Inspection of knock control sensor
    1. Measure the resistance between the terminals.
    RESISTANCE SPECIFICATIONS

    Inspection terminals Inspection conditions Standard value
    1 - 2 20°C {68°F} 532 to 588kΩ
    Fig 1: Identifying Knock Control Sensor Connector Terminals
    G11258409Courtesy of SUBARU OF AMERICA, INC.
About FixVault